Nuc-hatch: a shield for my Nucleo

Wiring the motor driver, encoder and CAN module straight to the Nucleo for the pan tracker got messy fast, and finding the right pin on the Zio headers every time was a pain. There’s only one 3V3 socket on the Zio headers too (CN8-7). I got frustrated and wired out a proto board as a hub. A common thread between posts here: spatial organization is important to me! I can’t stand wire clutter and fragile hardware setups. I digress. ...

November 19, 2026

My Nucleo's clock was 0.43% fast

Finally got some time to chase the loose thread on timing issues, and the motor bringup resurfaced the issue. Quick recap from the jitter post: the 1 kHz control tick on my pan tracker met its p99 target, but the Saleae and the DWT cycle counter didn’t agree, and the tick rate moved between captures (+2,398 ppm in one, +2,895 ppm in the next). My guess was the board clock, and it went on the todo list. ...

November 18, 2026