CAN over a USB-C cable

The CAN transceiver boards on the pan tracker were hanging off loose jumpers, and the bus between the Nucleo and the Jetson was hand-twisted wire. Due to my deep-seated fear of bumping my boards to the point of destruction: I decided to print an enclosure for the motor driver on my new Bambu A1. It went well, so the CAN boards were next. A USB-C cable already has a twisted pair (D+ and D−) and a ground, so I put a USB-C port on the end of the enclosure, and now any USB-C cable is a CAN cable! ...

November 15, 2026